2 pre-set speed ranges. Low speed 0 - 4 mph allows for precision control while high speed 0 - 12.5 mph can be used between sites
Hydrostatic drive also provides dynamic braking as the accelerator is released
Articulation
The center pivot is a substantial (five-inch diameter) steel forging allowing both articulation and oscillation movement giving a stable feel to the machine for the operator.
Heavy-duty plain bearings in the lower pivot carry the weight of the machine while articulation movement is restrained by the tapered roller bearings in the upper pivot.
Mainframe
Front chassis carries the loader unit minimizing any cables and pipework crossing the center pivot.
Well designed engine and cab mounts contribute to achieving an exceptionally low 101 db external and 73db in-cab noise level.
The engine is mounted transversely which allows an excellent 360 degree view from the cab and makes for a short rear overhang.
Cab and Controls
ROPS and FOPS cab offering a high level of comfort and excellent all around visibility.
Wide cab door and low floor result in faster entry and exit.
The biggest cab in class is extremely spacious and comfortable.
Single step gives improved access
Optional forward and reverse switch mounted on the joystick allows for easy and comfortable operation.
Serviceability
1,000-hour service intervals are double those of the competition
Excellent service access to daily checks and fills
Efficient, oil-cooled engine with no radiator means fewer parts and lower service costs
Hydraulics and electrical components are easily accessed from side panels
Oil-immersed disc brakes result in reduced maintenance and greater durability
GENERAL INFORMATION
Manufacturer
JCB
Model Year
2010
Model
406
MSRP
Request a Quote
DIMENSIONS
Length
16 ft. 10 in. (5,133 mm)
Height
8 ft. 2 in. (2,500 mm)
Width
5 ft. 9 in. (1,761 mm)
Weight
10,877 lbs. (4,934 kg)
Wheelbase
6 ft. 11 in. (2,100 mm)
Ground Clearance
1 ft. 1 in. (330 mm)
Turning Radius
Inside: 6 ft. 7 in. (2,010 mm)
Over Standard Shovel: 15 ft. 8 in. (4,160 mm)
Over Tires: 12 ft. 6 in. (3,800 mm)
DRIVETRAIN
Transmission Type
Rexroth A6VM
Transmission Speed
Low: 3.8 mph (6 km/h)
High: 12.5 mph (20 km/h)
Number of Speeds
2
Axles
JCB straight beam 111
Tires
12.5 x 18
ENGINE
Engine Make
Deutz
Engine Model
D2011 LO4i
Fuel Type
Diesel
Bore x Stroke
3.7 x 4.9 in. (96 x 125 mm)
Cylinders
4
Gross Horsepower
62 hp (46 kW)
Torque
140 ft. lbs. (190 Nm)
Fuel Tank Capacity
21 gal. (80 l)
Rated Speed
2,500 rpm
BATTERY
Voltage
12V
Amps
Alternator: 80A
Battery: 115A
HYDRAULICS
Hydraulic Tank Capacity
18.5 gal. (70 l)
Hydraulic Reserve
Gear
Reserve Capacity
21 gal. (80 l)
Std Pump Flow
16 gpm (60 lpm)
OPERATIONAL
Rated Operating Load
10,870 - 11,200 lbs. (4,934 - 5,082 kg)
Tipping Load
8,986 - 9,458 lbs. (4,076 - 4,290 kg)
Bucket Capacity
1 - 1.8 cu. yd. (0.8 - 1.4 cu. m)
Height to Bucket Pin
10 ft. 3 in. (3,131 mm)
Dump Height
7 ft. 6 in. - 8 ft. 2 in. (2,295 - 2,489 mm)
Dump Reach
4 ft. 10 in. - 5 ft. 6 in. (1,465 - 1,689 mm)
Dump Angle
45°
Bucket Breakout Force
6,676 - 9,420 ft. lbs. (29.7 - 41.9 kN)
Total Cycle Time
Arms Raise (Full Bucket): 4.9 sec.
Bucket Dump (Full Bucket): 3.5 sec.
Arms Lower (Empty Bucket): 3.1 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
